Industrial Facility: Cable support for production line equipment (galvanized material, oil-resistant)

Main Design:

Open-style pallet structure: The bottom features a continuously perforated flat plate or a lightweight mesh base (with a ventilation rate of ≥50%), and both sides are equipped with vertical side rails (height ranging from 30 to 150 mm).

Coverless design (optional): Naturally allows for heat dissipation; a perforated cover plate can be added for protection when needed.

Material options:

Cold-rolled steel sheet (Q235): thickness ranges from 0.8 to 3.0 mm, with a galvanized surface (zinc coating ≥65 μm) or powder-coated finish (RAL color chart available upon request).

Stainless steel (304/316L): Thickness 1.0–2.5 mm, corrosion resistance grade A2/A4.

Aluminum alloy (6063-T5): Lightweight design (density ≤ 2.7 g/cm³), corrosion-resistant and maintenance-free.

Standardized components:

Straight section (standard lengths: 2m / 3m / 6m)

Horizontal/Vertical Elbows (30°, 45°, 90°)

Three-way/Four-way

Wide/Height-Adjustable Connector

Technical specifications

Project Parameter Range

Width (W): 50 mm – 1200 mm (in 50 mm increments)

Height (H): 30mm / 50mm / 75mm / 100mm / 150mm

Load ratings from C1 (light load) to C4 (heavy load)

Uniformly distributed load ≥100 kg/m (under 2 m span conditions)

Fire resistance rating meets GB 8624 Class B1 (flame-retardant)

Protection rating IP30 (open) / IP54 (with cover plate)

Core Advantages

✅ Outstanding cooling performance

Open-style design with a perforated baseplate boosts heat dissipation efficiency by 40% compared to closed cable trays, reducing cable temperature rise by 15–20°C and extending cable lifespan.

✅ Quick Installation and Maintenance

No need to disassemble the structure to add or remove cables, saving over 50% of maintenance time. The modular design supports tool-free assembly—choose between snap-in or bolt-on options.

✅ Great value for money

It boasts high material utilization and is 20-30% more cost-effective than trough cable trays, making it ideal for large-scale cabling projects.

✅ Flexible scalability

Supports multi-layer stacking (layer spacing ≥300mm) and is compatible with hybrid systems featuring stepped or trough-type cable trays.

Typical application scenarios

Data Center: Main power and low-voltage backbone cabling above server cabinets (recommended width ≥ 600mm)

Industrial厂房: Cable support for production line equipment (galvanized material, oil-resistant)

Commercial Buildings: Vertical Cable Shafts in Shopping Malls/Office Buildings (Equipped with Fire-Resistant Partitions)

New Energy Facilities: DC Combiner Box to Inverter Channel for Photovoltaic Power Plants

Install the accompanying system

Support components: C-channel steel brackets, suspension rods (M10–M16), and seismic bracing supports (designed for 9-degree earthquake resistance)

Grounding System: Jumper copper braid (≥4 mm²) or galvanized connecting plates

Safety accessories: non-slip rubber pads, cable ties (flame-retardant nylon/stainless steel)

Implementation Standards

National Standard: GB/T 21762-2008 "Cable Trays for Cable Management"

European Standard: IEC 61537-2006

US Standard: NEMA VE1-2017

Note: Non-standard customization is supported (curved designs, large spans, and corrosion-resistant reinforced versions). BIM models (.rfa/.ifc formats) and load calculation reports are also provided.