During the use of cable trays, it is inevitable to encounter some fault problems. Mastering common fault handling methods can effectively shorten the fault handling time and ensure the normal operation of the power system. Although the cable tray of Zhonglianxing Power Technology is reliable in quality, problems such as tray deformation and cable overheating may occur during long-term use. ​
When deformation of the bridge is found, the cause of the deformation should be checked. If it is due to excessive load, the cable distribution should be adjusted in a timely manner to reduce the load on the bridge; If deformation is caused by external impact, the deformed part should be repaired or the damaged component should be replaced. For cable overheating faults, it is necessary to check whether the cable is overloaded, whether the contact is good, clean the debris inside the cable tray that affects heat dissipation, and ensure a good ventilation and heat dissipation environment. If the insulation layer of the cable is found to be damaged, the power should be cut off immediately, and the damaged cable should be replaced to prevent leakage accidents. Familiarity with these common troubleshooting methods can help users quickly respond to problems, reduce losses caused by faults, and ensure the safe and stable operation of cable trays and power systems.